Dell XPS 13 7390 2-in-1 Service Manual page 38

System Configuration
Enable Fingerprint Reader Single Sign On
Enable MediaCard
Keyboard Illumination
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on Battery
Table 5. System setup options—Video menu
Video
LCD Brightness
Brightness on battery power
Brightness on AC power
Table 6. System setup options—Security menu
Security
Enable Admin Setup Lockout
Password Bypass
Enable Non-Admin Password Changes
Non-Admin Setup Changes
Allow Wireless Switch Changes
Enable UEFI Capsule Firmware Updates
Absolute
TPM 2.0 Security On
38 System setup
Enables or disables the Fingerprint Reader Device's Single Sign On capability.
Default: ON.
Enables to switch all media cards On/Off or set the media card to read-only state.
Default: Enable Secure Digital (SD) Card.
Configures the operating mode of the keyboard illumination feature.
Default: Bright. Enable the keyboard illumination feature at 100% brightness level.
Configures the timeout value for the keyboard when an AC adapter is connected to
the computer. The keyboard backlight timeout value is only effect when the backlight
is enabled.
Default: 10 seconds.
Configures the timeout value for the keyboard when the computer is running on
battery. The keyboard backlight timeout value is only effect when the backlight is
enabled.
Default: 10 seconds.
Sets the screen brightness when the computer is running on battery power.
Sets the screen brightness when the computer is running on AC power.
Enables or disables the user from entering BIOS Setup when an Admin Password is
set.
Default: OFF.
Bypass the System (Boot) Password and the internal hard drive password prompts
during a system restart.
Default: Disabled.
Enables or disables the user to change the system and hard drive password without
the need for admin password.
Default: ON.
Enables or disables changes to the setup option when an Administrator password is
set.
Default: OFF.
Enables or disables BIOS updates through UEFI capsule update packages.
Enables, disables or permanently disable the BIOS module interface of the optional
Absolute Persistence Module service from Absolute Software.
Default: Enable Absolute.
Select whether or not the Trusted Platform Model (TPM) is visible to the OS.
Default: ON.