Teledyne 3160 Operating Instructions Manual page 48

4 Operations 4 Operations
4 Operations 4 Operations 4 Operations
4-20
7. If SET was pressed in step 1, the menu for setting the
time and date will appear. Use the SELEC, UP and
DOWN keys to set the time and date, and then press
ACCPT.
8. If ZERO was pressed in step 1, the menu for setting
AutoZeroing ON/OFF, time/date of the next zeroing,
and time interval for automatic zeroing will appear.
9. Use the SELEC, UP and DOWN keys to make selec-
tions, and press ACCPT.
10. If SPAN was pressed in step 1, the menu for setting
AutoSpanning ON/OFF, time/date for the next calibra-
tion, and interval for automatic calibration will appear.
11. Use the SELEC, UP and DOWN keys to make selec-
tions, and press ACCPT.
12. If ALRMS was pressed in step 1, a menu displaying the
most recent triggering time and date of each of the
alarms will appear. From here, press ESC three times to
return to the main menu screen.
TELEDYNE ANALYTICAL INSTRUMENTS