Advertisement
ICWUSA.com, Inc.
IF USING ULTRA KEYBOARD TRAY
ATTACH FLIPUP TO PLATE
Attach the tray
fl ip-up assembly
to the fl ip-up plate
using the provided
fl at head screws
and hex key.
IF USING PARALINK KEYBOARD TRAY
ATTACH KEYBOARD TO MONITOR
Attach
the
Paralink
Keyboard Mount to
the
Monitor
Mount
by using the 3/8-16
screw and lock washer
provided
ATTACH COVERS TO MD ARM
page 3
MD ARM INSTALLATION INSTRUCTIONS
ATTACH PARALINK KEYBOARD TRAY
Attach the keyboard tray
to the Keyboard Mount
using the supplied 5/16-
18 socket head screw.
After lowering the arm to the
down position, slide on the
lower cover. Using a Phillips
head
screwdriver
POWER TOOLS), reattach the
four screws attaching the lower
cover.
Attach
the
top
reattaching the four top cover
screws using a Phillips head
screwdriver
(NOT
TOOLS).
WARNING - PINCH POINT:
Keep fi ngers away from the
inner arm area where the gas
spring is located.
If you have any questions, please call 1-800-558-4435
ADJUST MD ARM RESISTANCE
(NOT
cover
by
POWER
MD ARM INSTALLATION INSTRUCTIONS - rev 11/13/2012 mf
Loosen knob to adjust Paralink.
Adjust horizontally for keyboard tray
and vertically for monitor. Tighten
knobs when in desired position.
Using the 3/16"
t - h a n d l e
wrench provided,
turn the screw in the
MD arm clockwise
to lighten the arm's
load resistance, or
counter-clockwise
to increase the load
resistance.
h e x
Advertisement
