Cleaning & Maintenance Instructions; Service & Maintenance; Spare Parts; Warranty - SEMAK BBDD Operation And Warranty Booklet

Bar blenders
Table of Contents

Advertisement

CLEANING & MAINTENANCE INSTRUCTIONS
1. ALWAYS turn off the appliance before cleaning.
2. Use a barely damp cloth to wipe the machine.
3. Place warm water and a little dishwashing detergent in the container and run for 15-30
seconds. Rinse in clean water and leave to dry.
4. DO NOT leave liquids in the container for long periods as this may dry out the self-
lubricating bearing.
5. Do not wash in a dishwasher.
6. DO NOT use caustic substances to clean the warmer and do not allow caustic substances
to make contact with any electrical components of the warmer.
SERVICE & MAINTENANCE
For Service and Repair, contact Semak for your nearest Authorised Service Agent
The Foodservice Industry is deemed a hostile environment within the scope of AS/NZS
3760:2003. Semak Bar Blenders MUST be routinely electrically tested for compliance with
this standard if used commercially.
It is recommended that a Food Safety program such as HACCP be employed and that
routine service and repair be undertaken at the time of electrical testing to ensure the
correct operation and function of all parts. The equipment MUST be serviced annually or
sooner depending of the hostility of the environment in which it is operated.

SPARE PARTS

Spare Parts, exploded views and wiring diagrams are available from our webpage. Go to
www.semak.com.au
information.

WARRANTY

Models BBSS, BBPC AND BBDD are Commercial Grade blenders suitable for commercial use.
This product is guaranteed for 2 Years from the date of purchase against mechanical and
electrical defects. If the fault is deemed caused by MISUSE/ABUSE the terms of the
warranty are invalidated.
If the product has been opened or tampered with (ie. In an attempt to repair it) the
warranty is invalidated. All warranty repairs should be undertaken by Semak Australia.
It is against company policy to authorize warranty repairs over the phone. Service Agents
will require a work order number from Semak to conduct warranty repairs.
and locate the appliance in the product section for the above
Page | 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

BbssBbpc

Table of Contents