Table of Contents
Advertisement
12.WARNING: Blade is sharp. Please handle carefully
DO NOT try to remove blade while the container is sitting on the motor base.
DO NOT operate with loose, nicked or damaged blade replace immediately.
CAUTION Keep all utensils AWAY FROM the drive socket and blender blades during
operation. Metal utensils will damage blades.
DO NOT place container into drive socket if blender motor is operating.
DO NOT rock the blender during operation.
13.When blending liquids, especially hot liquids, ensure that the lid is on securely and
the lid insert is in place to reduce the risk of spillage and injury. Hot liquids build
up steam pressure and special care must be given when removing the container
and lid from the blender that the contents don't splatter and burn the operator.
Keep hands, arms and face away from the lid insert to prevent possible scalding.
DO NOT start blending hot liquids on HIGH speed. Always start processing hot
liquids on LOW speed then increase while the machine is running.
14.Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, is dropped or damaged in any way. Return the appliance to Semak
Australia. (Manufacturer) or its Authorised Service Agent for repair.
Do not attempt to repair the machine.
15.For Safety reasons and to avoid maintenance by unskilled persons, the appliance
should always be returned to Semak Australia. (Manufacturer) for adjustment or
repair if required.
WARNING – This appliance should be used according to the instructions.
FEATURES OF THE BAR BLENDER
- Stainless Steel Or Polycarbonate Container
- Stainless Steel Blades
- Self-Lubricating Bearing
- Heavy Duty Motor
- Variable Speed Control
- Self-Locking Container
- Rubber non-slip feet
- 1 litre capacity
MISUSE of this appliance will cause HAZARD.
Page | 5
Advertisement
Table of Contents
