Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Please read all of the instructions before using the Semak Bar Blender and ensure
that other operators also read and understand all safety and operating instructions.
Save these instructions for Future reference.
Thank you for purchasing a Semak Bar Blender.
1. Important notice: Ensure that the power supply is switched off before connecting
to the electric outlet.
2. Use only on AC 220-240V – 50 Hz only.
3. Do not use an extension cord.
4. To avoid risk of electric shock, do not immerse cord, plug or motor end of the
appliance in water or any other liquid. Never put the Blender or container in a
dishwasher.
5. Always switch off at the power outlet before removing the plug. Remove by
holding the plug - do not pull on the cord. When the appliance is not in use, or
prior to cleaning, always switch off the power and remove the plug.
6. Disconnect power cord from the electrical outlet when the blender is not in use.
7. The blender should not be used by children or infirm persons and care should be
taken when used near these persons. The blender should not be used outdoors.
Young children should be supervised to ensure that they do not play with the
appliance. Never leave the blender unattended.
8. Avoid physical contact with moving parts. The cutting blades are very sharp and
care is needed when handling cutting blades, and only when the Bar Blender is
disconnected from the power supply. Never attempt to touch the cutting assembly
when the blender is in operation.
9. Never operate the Bar Blender without the container securely in place. Never
operate the blender with an empty container.
10.Do not use on the stove or let the cord come in to contact with any hot surface.
11.Keep hands and utensils out of the container while using the blender to prevent
the possibility of severe injury to persons or damage to the unit.
Page | 4
Advertisement
Table of Contents
