Cleaning; Cleaning Before The First Use; Cleaning After Use; Maintenance - SEMAK VB250 Operation And Warranty Booklet

CLEANING

Before any cleaning, stop and unplug the machine.

CLEANING BEFORE THE FIRST USE

 Clean the tube, the blade guard and the blade in hot water and a detergent compatible with
this type of material.
 Rinse and dry them carefully.

CLEANING AFTER USE

 Operate the machine in a hot and clean water container for some seconds in order to remove
residues from the blade, the blade guard and the tube.
 Dismount the machine as suggested in Figure 1. If the machine has been used in a hot
preparation, leave it cool off before disassembling it.
 The tube, the blade guard and the blade must be washed in a plenty of clean water and a
detergent compatible with this type of material. Before drying, rinse with clean water.
 To clean the transmission shaft and the lower bearing bush use a brush.
 Disinfect all the parts in constant contact with the food with the help of a smooth cloth
impregnated with ethyl alcohol 90º.
 To clean the motor unit, use a damp cloth or a sponge and dry it next.
WARNING!
Do not immerse the motor unit under running water or immerse it in water or any other liquids to
avoid electrical shocks.

MAINTENANCE

 Before any maintenance, stop the machine and unplug it.
 The result of the mixture will depend basically in the condition of the blade. It gets damaged
with the use and it will have to be replaced periodically to obtain the best quality of the
mixture.
 Check the joints and the oil seal regularly and replace them if necessary, in order to maintain
the machine in a perfect condition.
 Check periodically that the air grills are not closed up.
 Never use the machine if the power cord is damaged. An Authorised After Sales Agent should
only replace it.
Page | 12