Replacing Parts; Repackaging For Shipment - Tektronix TekConnect Probe Interface Module 80A03 Instruction Manual

Maintenance
Product Requires Service

Replacing Parts

Repackaging for Shipment

26
The following conditions indicate an internal failure. See page vi for information
on contacting Tektronix for service.
H No LED activity at power on.
H LEDs are inactive on a single channel.
H LED response is inconsistent when connecting the same probe alternately to
both channels.
Refer to the Replaceable Parts section on page 27 for a list of customer
replacement parts.
If the original packaging is unfit for use or not available, use the following
packaging guidelines:
1. Use a corrugated cardboard shipping carton having inside dimensions at least
one inch greater than the probe dimensions. The box should have a carton
test strength of at least 200 pounds.
2. Put the probe into an antistatic bag or wrap to protect it from dampness.
3. Place the probe into the box and stabilize it with light packing material.
4. Seal the carton with shipping tape.
80A03 TekConnect Probe Interface Module Instruction Manual