Table of Contents
Advertisement
Chapter 1. Removable media device
Replacing and installing this feature are customer tasks. When you use these instructions, you will
perform some or all of the following tasks:
v Perform prerequisite tasks.
v Power down the system unit.
v Remove the system unit covers.
v Remove hardware.
v Install new hardware.
v Install covers.
v IPL your operating system.
v Verify your new hardware configuration.
It will take approximately one hour to perform these tasks. You may need to allow additional time to
complete your jobs, back up your system, IPL your system, and verify your hardware configuration.
You can choose to perform these tasks yourself or contact IBM(R) or an authorized service provider to
make arrangements for them to perform the tasks for a fee. Should you encounter difficulties when
performing a task, contact your authorized dealer or service provider.
Select the instructions for the task you want to perform:
v Chapter 3, "Replace removable media devices in iSeries 270, 800, 810, or 820," on page 5
v Chapter 5, "Replace removable media devices in iSeries 825," on page 13
v Chapter 7, "Replace concurrent removable media backplane," on page 25
v Chapter 4, "Install removable media devices in iSeries 270, 800, 810, or 820," on page 7
v Chapter 6, "Install removable media devices in iSeries 825," on page 19
v Chapter 8, "Install concurrent removable media backplane," on page 27
1
© Copyright IBM Corp. 2000, 2005
Advertisement
Table of Contents
