User Guide - Tekkeon MP3450 User Manual

TIP: You can optimize the use of myPower ALL Plus with your notebook computer or portable DVD
player by setting the voltage on myPower ALL Plus to less than the required voltage shown on the
notebook computer power supply. This prevents myPower ALL Plus from charging the device, thus
extending the amount of time you can use myPower ALL Plus to power your notebook computer.
Most notebook computers have a battery voltage of 11.1V or 14.8V, allowing them to be powered with
12V or 14V. Therefore, it is recommended that you set the voltage to 12V first, and then test to see if it
will power your notebook. If not, increase the voltage to 14V, and retest. For MP3400 repeat this process
until you reach the voltage that will power your notebook.
Most portable DVD players require 9 or 12 volts. Set the voltage to 7.5V and test to see if myPower ALL
Plus will power your device at this setting. If not, increase the voltage by one level and retest.
This table
provides
recommended
voltage
settings by
device type.

USER GUIDE

myPower ALL Plus VOLTAGE SELECTION
Device Type
Notebook Computers
Portable DVD Players
Digital Cameras
CD Players
PDAs
Mobile Phones
Digital Camcorders
MP3/MP4
Voltage on Device
Power Adapter
14V
16V
19V
24V
9V
12V
5 - 6V
4.5 - 5V
5V
3.7 - 6V
9V
12V
5V
Suggested Voltage on
myPower ALL Plus
12V
14V
14 - 16V
19V
7.5 - 9V
9 - 12V
5 - 6V
5V
5V
5 - 6V
7.5 - 9V
9 - 12V
5V
7