JLab Audio X-BASS Quick Start Manual

We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
REQUIREMENTS
• Computer with available USB port
• Windows
98 or later, Mac OS
®
INSTRUCTIONS FOR USE
1
Turn your computer on and allow it to start completely.
2
Close any programs that produce sound including MP3 players,
media players, VOIP programs, and instant messenger programs.
3
Insert the USB connector of your X-Bass into an available USB port on
your computer. The X-Bass does not require you to install any drivers. Your
computer should automatically recognize the X-Bass as a USB audio device.
4
Before removing your X-Bass, you should also close any programs that
produce sound. Never remove the X-Bass while it is in use, as that may
cause sound programs to experience errors.
USING THE X-BASS WITH MICROSOFT WINDOWS
1
You may see a message indicating that your computer recognizes the device and that the device is ready for use.
You may also hear a sound from your X-Bass.
2
Test the device by using any application that produces sound. If you hear the sound through your X-Bass, then it is ready for use.
3
If you cannot hear sound through your X-Bass, close any programs that produce sound and go to:
Start > Settings > Control Panel > Sounds and Audio Devices.
4
Under the Volume tab, click Advanced. A new window will open. Make sure the device volume is not muted and raise the volume bar
all the way to the top.
5
Minimize the new window. Then go to the Audio tab and select USB Audio Device as the default device for sound playback.
6
If the Apply button at the bottom is clickable, then click it and then click OK. Now try any application that produces sound.
7
If the sound is still not coming through your X-Bass, try shutting down your computer. Then, make sure the X-Bass is connected to
an available USB port and turn your computer on. Repeat the steps above.
USING THE X-BASS WITH MAC OS
1
Click the Apple icon in the upper left corner of your screen.
2
Click System Preferences.
3
In the Hardware section, click Sound.
4
In the Sound panel, click Output. Click USB Audio Device as the device for sound output.
5
Raise the volume at the bottom to your desired level. Your X-Bass should now be ready for use.
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date.
jlabaudio.com/guarantee
Learn more at
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
support@jlabaudio.com
Reach out to us at
, or Linux Kernel 2.4 and above
® ®
®
jlabaudio.com/contact
or visit
®