Advertisement
Quick Links
We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
ACCESSORIES
AC POWER
ADAPTER
REMOTE
CONTROL
POWER
1
Connect the Bouncer to the power adapter and plug it into a wall socket.
2
Press the Power / Mode button. The red light will indicate power is on.
3
Press button once to toggle between Bluetooth and AUX mode.
4
Press and hold button for about 5 seconds to power off.
BLUETOOTH FUNCTION
1
Power on the Bouncer and your Bluetooth device. The Bouncer will enter
Bluetooth pairing mode indicated by the blinking blue light.
2
Use your Bluetooth device to search for the Bluetooth signal. Please allow
10-20 seconds for your device to connect. JLab Bouncer will appear on
your Bluetooth device list. Enter PIN code "0000" if prompted.
3
Bluetooth connection is indicated by the solid blue light. The unit will sync
to play songs on your device when connected successfully.
Notes:
• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the speaker and the connected device.
The speaker is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).
• Once successfully connected, the speaker will memorize your device and automatically pair when turned on in the future.
• Only one device may be connected at a time. To reset the Bouncer and void any existing connections, disconnect your first device,
then follow the steps above to connect your new device.
• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date.
jlabaudio.com/guarantee
Learn more at
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
support@jlabaudio.com
Reach out to us at
SPEAKER PORTS
/
/ MODE
POWER
/
MODE
WIRELESS INDICATOR
BUTTON
PHONE BUTTON
or visit
BUTTONS
/
VOLUME
DOWN
jlabaudio.com/contact
VOL
VOLUME
UP
JLab
Bouncer
BACK PORTS
POWER
INPUT
AUX IN
USB OUT
AUX
USB
INPUT
OUTPUT
Advertisement
Related Manuals for JLab Audio BOUNCER
Summary of Contents for JLab Audio BOUNCER
- Page 1 • Once successfully connected, the speaker will memorize your device and automatically pair when turned on in the future. • Only one device may be connected at a time. To reset the Bouncer and void any existing connections, disconnect your first device, then follow the steps above to connect your new device.
-
Page 2: Troubleshooting
Connect your portable device with its own charging cable (not included) to the USB port on the back of the Bouncer speaker. Note: The Bouncer will supply a current of 1A. This will charge most cell phones and portable devices. Some tablets, including the iPad, require at least 2.1A of power to charge up quickly or if their battery is less than 30%. - Page 3 CAUTIONS • Listen to music at a suitable volume for enjoyment in order • Clean only with dry cloth. For stubborn stains, use a soft cloth to not cause damage to your hearing and/or speaker system. dampened with a weak solution of mild detergent and water. Dry the speaker immediately afterwards with a clean cloth.