JLab Audio SHAKER Quick Start Manual

We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
ACCESSORIES
SUCTION CUP SCREW MOUNT
ATTACHMENT ATTACHMENT
AUX / MINI USB TRAVEL
CABLE BAG
INSTALLATION
1
Remove the protective tape at the bottom of the Shaker to reveal
the rubber stand for use on horizontal surfaces.
Do not throw away the protective tape. You will need to stick it back
on the rubber stand when using a mounting socket or suction cup.
2
Use a wet towel to clean any dust off the pad.
3
Carefully twist the speaker into the provided suction cup and mount
to vertical surfaces such as windows while sliding the lock into place.
A screw mount is also provided to screw the speaker into a wall
or wooden surface.
CHARGING
Note: For optimum performance, charge overnight
with Mini USB cable prior to using.
1
Before charging, it is recommended you turn off the Shaker.
2 Connect the Shaker to your computer or wall outlet using
the provided Mini USB cable and/or 5V power adapter.
3
The battery LED light will turn red indicating charging is
in progress. When it turns green, charging is complete.
4
Charge the Shaker again when you see the battery LED
light blinking rapidly.
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date.
jlabaudio.com/guarantee
Learn more at
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
support@jlabaudio.com
Reach out to us at
SPEAKER PORTS
USB ON/OFF/BT
POWER
USB
INPUT BLUETOOTH SWITCH
jlabaudio.com/contact
or visit
/ BUTTONS
BATTERY LED
/
LED
USB ON/OFF/BT
OR
SKIP BACK /
VOLUME DOWN (HOLD)
PLAY / PAUSE
SKIP FORWARD /
VOLUME UP (HOLD)
LED