7.
Navigating the menu
1. From the standby screen, press Menu.
The main menu is opened and the display will show the main menu
icons.
2. Use the
/
3. Left soft key - press to action the corresponding word prompt shown
in the lower left corner of the display.
Right soft key - press to action the corresponding word prompt in the
lower right corner of the display.
4. Press
to return to standby.
8.
Date & time
The date and time on your handset device are set automatically during
set-up with the Telstra Voice app. If you subscribe to caller ID service,
the day, month and time are set automatically with each incoming call,
thereafter.
In the event your handset date and time get out of sync after events like
power cuts or a switch to daylight-saving time, you can set the date and
time manually.
8.1
Set the date and time
1. Press Menu, scroll to
2. The last set date is displayed. Enter the date, e.g., when set to DD/MM,
25/09/2019 for 25 September 2019 and press OK.
3. To change the date format, scroll
DD/MM
select either
4. The last set time is displayed. Enter the time, e.g., when set to 24
Hours, 14:30 for 2:30pm.
If the current time format setting is 12 Hours, scroll or to select
or PM.
/ / keys to scroll through the menu.
Date/Time
and press Select.
or MM/DD. Press OK.
to
Date Format
and scroll or to
8
AM