Usb Interface / Driver Installation - GE eBike III basic Series Service Manual

B III CardIosoft / Cs
e Ike to
b iii
e ike
C
onneCtIons
2017911-131
• cable:
• eBike: USB
• CARDIOSOFT / CS: USB
usB /
InterfaCe drIver InstallatIon
To use the communication via USB, a driver to generate a
virtual COM port has to be installed in the PC.
The driver for the used operating system is available on the
CD delivered with the eBike III system.
If the driver CD is not available, it can be downloaded from
GE InfoCenter or you can contact GE technical support.
2018111-336 Rev. B
cable
eBike III basic / comfort
cardioSoft / cS
2017911-131
- 83 -