GE eBike III basic Series Service Manual page 47

3. The top cover can be easily removed.
r
eMove HousIng BraCkets
1. Using a small screwdriver, cut into the two plastic
caps (top: cap type 2, bottom: cap type 1) covering the
screws and remove the caps on both sides.
The caps will later be replaced by spare ones
(P/N 2018111-335).
Note
• The top plastic cap (cap type 2) is not symmetric - when
reassembling the bracket housing, the indication mark of
this cap (two notches) has to be positioned at the top!
2018111-336 Rev. B eBike III basic / comfort - 47 -