TP-Link TL-WA701ND Manual page 2

Note The product model shown in this QIG is TL-WA701ND, as an example.
Assign a static IP address 192.168.0.100 for your computer. Please refer to
the T3 in Troubleshooting guide if you need assistance.
Connect to the Access Point with
the Ethernet
wireless.The default SSID of the
Access Point
XXXXXX. The XXXXXX is the
last 6 characters of the Access
Point's MAC address.
Plug the provided power adapter
into the power jack on the back of
the Access Point, and the other
end to a standard electrical wall
socket.
Note If the distance between the outlet and the Access Point is too long to supply
the power, you can refer to the Power over Ethernet(PoE) solution in
Appendix B: With PoE Setup.
cable or via
is TP-LINK_
1