Pkm GT 200A++ Instruction Manual page 32

g) you do not overfill the appliance.
8. CLEANING AND MAINTENANCE
Disconnect the appliance from the mains before you clean or maintain it.
Always keep the appliance clean so that unpleasant odours do not occur.
Do not touch the extremely cooled surfaces with wet or damp hands, because
your skin may stick on these surfaces.
Dust deposits on the condenser will increase the energy consumption. Clean the
condenser twice a year with a vacuum cleaner or a soft brush.
Take off all rings and bracelets before cleaning or maintaining the appliance;
otherwise you will damage the surface of the appliance.
Do not use any harsh, abrasive and aggressive detergents.
Do not use any solvents.
These instructions are valid for all surfaces of your appliance.
1. Use a moist cloth and a mild, non-acidic detergent. Use silicon wax for
stubborn stains and for periodic waxing.
2. Use clear water to rinse.
3. Dry the cleaned surfaces with a cloth.
1. Clean the shelves and the other removable parts with warm water and a mild,
non- acidic detergent.
2. Use clear water to rinse.
3. Dry the cleaned surfaces with a cloth.
4. Clean the interior with baking soda ( 3 tablespoons per litre of water ) or with
water and a mild, non- acidic detergent.
5. Use clear water to rinse.
6. Dry the cleaned surfaces with a cloth.
7. Check the water drain and clean it if needed.
Clean with warm water and a mild, non- acidic detergent.
Do not use any abrasive detergents! Do not use any organic detergents!
10
Detergents such as vinegar, citric acid etc.
WARNING!
Detergent
External cleaning
Internal cleaning
Door seals
Do not use essential oils!
32
10