Quick Surround Sound Setup; Automatically Setting Up For Surround Sound (Mcacc) - Pioneer XRB3059-A Operating Instructions Manual

Quick surround sound setup

Chapter 3:
Quick surround sound setup
Automatically setting up for
surround sound (MCACC)
The Auto Multi-Channel Acoustic Calibration
(MCACC) setup measures the acoustic
characteristics of your listening area, taking
into account ambient noise, speaker size and
distance, and tests for both channel delay and
channel level. After you have set up the
microphone provided with your system, the
receiver uses the information from a series of
test tones to optimize the speaker settings and
equalization for your particular room.
Important
• The Auto MCACC Setup will overwrite any
existing speaker settings you've made.
• Make sure the headphones are unplugged.
Caution
• The test tones used in the Auto MCACC
Setup are output at high volume.
RECEIVER INPUT
SOURCE
SELECT
DVD TV DVR TV CTRL
CD-R/TAPE USB
CD FM AM RECEIVER
1 Switch on the receiver and your TV.
2 Connect the microphone to the MCACC
SETUP MIC jack on the front panel.
Note
1 The screensaver automatically starts after three minutes of inactivity. If you cancel the Auto MCACC Setup at any time, the
receiver automatically exits and no settings will be made.
D.ACCESS
CLASS
+10
DISC
ENTER
MENU
TOP MENU
TUNE
DTV MENU ST ST T.EDIT
ENTER
SETUP RETURN
TUNE
GUIDE
TV CONTROL
INPUT
TV VOL TV CH VOL
SELECT
REC
Push down on the PUSH OPEN tab to access
the MCACC SETUP MIC jack.
MCACC
SETUP MIC
DOWN
If you have a tripod, use it to place the
microphone so that it's about ear level at your
normal listening position. Otherwise, place the
microphone at ear level using a table or a chair.
• Make sure there are no obstacles between
the speakers and the microphone.
3 Press RECEIVER on the remote control,
then press the SETUP button.
An on-screen display (OSD) appears on your
and ENTER on the remote
TV. Use
control to navigate through the screens and
select menu items. Press RETURN to exit the
current menu.
• Press SETUP at any time to exit the System
1
Setup menu.
4 Select 'Auto MCACC' from the System
Setup menu then press ENTER.
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
: Exit
MASTER
VOLUME
UP
2. Auto MCACC
Surr Back System
Normal (SB) ]
ENTER: Start : Cancel
03
9
En