Approaching The Next Destination; Blocking Route Segments; Manual Blocking - Blaupunkt TravelPilot Lucca 3.4 Operating Instructions Manual

Additional functions
Note:
You can also select the interim
destination directly from the map
as described in the section "Copy-
ing a destination from the map".
Next, touch the Interim dest. but-
ton.
Approaching the next
destination
This function is only available if you
travel on a route with at least one in-
termediate destination.
Use this function if you want to skip
the next route point.
➜
Touch the Next destination but-
ton to approach the next to one
route point.
The route is recalculated and the
next but one route point is ap-
proached as the next destination.
64

Blocking route segments

Blocking route
segments

Manual blocking

You have the option of manually
blocking a route segment located on
your route to evade this road section
during the destination guidance. Af-
ter a manual blocking, the route is
recalculated.
Supposing that you are on the motor-
ways and hear a traffi c report on the
radio about a traffi c jam of 5 km on
your route. In this case, you can use
a manual blocking of the section to
evade the traffi c jam.
The manual blocking applies only to
the current destination guidance. For
a new destination guidance or after
a restart of the navigation mode, the
blocking is no longer available.
Route segments are blocked as fol-
lows:
Prerequisite:
• You are in the map display during
a destination guidance.
➜
Briefl y touch any position on the
map.