Table of Contents
Advertisement
Working with the map
Working with the map
Map operation
In this section you learn which in-
formation and which processing op-
tions are available in the map view.
Depending on whether you display a
map without or during the destina-
tion guidance, different options are
available for operation.
Showing a map
You can display the map:
•
During route planning
•
To display destinations on the
map
•
To copy destinations from the map
for the destination guidance
You can open the map view as fol-
lows:
•
Via the Show map button in the
Navigation menu.
•
Via the On map button in the Des-
tination entry menu.
•
Via the Show button in the ad-
ditional functions in the Address
menu after selecting a destination.
54
Touching the map
➜
Briefl y touch the map to display
additional functions.
Depending on whether you are cur-
rently in an active destination guid-
ance or only display the map, only
certain functions are available.
➜
Touch the map for a few seconds
to defi ne the city (street or point
of interest) as the destination.
(Identifi ed by an orange-dotted
circle around the city.)
A window with information about
the selected location is displayed.
This window also allows you to call
up functions for the location.
For further details, please read the
section "Copying a destination from
the map".
Buttons
Different buttons are available in the
map view with which you can adjust
the display according to your needs.
Advertisement
Table of Contents
