Tuner; Selecting Tuner; Tuning To A Station; Using Presets - THOMSON MS4000 User Manual

MS4000 EN 3/5/03 8:46 AM

Tuner

EN

Selecting Tuner

1. Press SOURCE to select TUNER.
2. Press BAND to select between FM/MW/LW radio
band.
Tip: Your audio system has 32 preset stations.

Tuning to a Station

Press SKIP BACKWARD
to select frequencies.
87.50 MH

Using Presets

The tuner can be either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press TUNE•PRESET to toggle between Preset and
Tune mode.
• Press SKIP BACKWARD
or PRESET UP or PRESET DOWN on the remote
control to access the previous or next preset station.
The display first shows the preset program number
and after a few seconds, the frequency will be dis-
played. (FMPR:01 is FM preset 1)
PR:01
Auto Preset Programming (for FM only)
Press and hold BAND/AUTO PROG./DECK1•2 button
for 2 second to scan stations in the selected band. The
stations will then be stored as preset channels. A
maximum of 32 stations can be stored. Beware of
your preset channels being erased accidentally
because the scanning and storing process is automatic
upon pressing the button.
You can stop the automatic scan by pressing any but-
ton, but the erased stations cannot be recovered.
Manually Setting Presets
1. Press TUNE•PRESET to enter TUNE mode.
2. Press SKIP BACKWARD
to access the desired frequency.
3. Press the PROG•SET button once.
8
Page 12
4. The most recently accessed program location will
be displayed.
5. If a different program location is preferred, press
SKIP BACKWARD
to the desired preset number (1-32).
6. Press PROG•SET to store the selected frequency at
that preset.

Suppressing Stereo Signal

Press FM ST to toggle between FM mono and stereo
/ SKIP FORWARD
for stereo FM stations. (Remote Only)
z

Tuning to an RDS Station

Tip: RDS stations broadcast on FM only. When the
tuner detects an RDS signal, the RDS icons turns
on.
1. Press TUNE•PRESET to access preset station or
press SKIP BACKWARD
to desired frequency.
2. If RDS station found, RDS lights on display with
/ SKIP FORWARD
station name shown.
Displaying RDS Station Information
Press CLOCK/RDS on the main unit or REPEAT•RDS
on the remote control to display the frequency, sta-
tion name (PS), station type (PTY), clock time (CT), or
radio text (RT). In CT mode, press INTRO•CT key to
replace the displayed time by RDS station time. If
clock time is not yet set, this information will be
shown as clock time automatically.
Searching by Program Type (PTY)
(Remote Only)
1. Press
2. Toggle
3. Within 5 seconds, press SKIP BACKWARD
/ SKIP FORWARD / SKIP FORWARD
broadcasting the selected type of program.
/ SKIP FORWARD to move
/ SKIP FORWARD
BBC No...
SCIENC...12:05
/PTY to enter PTY selection
/PTY to select a PTY mode.
to search for a station