Asus TUF Gaming X570-Plus Manual page 25

3. AMD Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-8)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, and
RAID 10 configuration through the onboard AMD X570 chipset.
TUF GAMING X570-PLUS SATA 6 Gb/s connectors
• These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[RAID].
Before creating a RAID set, refer to section RAID configurations or the manual
•
bundled in the motherboard support DVD.
When using NCQ, set the SATA Mode in the BIOS to [AHCI]. Refer to section SATA
•
Configuration for details.
ASUS TUF GAMING X570-PLUS
A
SATA6G_1 SATA6G_2
GND GND
RSATA_TXP1 RSATA_TXP2
RSATA_TXN1 RSATA_TXN2
GND GND
RSATA_RXN1 RSATA_RXN2
RSATA_RXP1 RSATA_RXP2
GND GND
SATA6G_3 SATA6G_4
GND GND
RSATA_TXP3 RSATA_TXP4
RSATA_TXN3 RSATA_TXN4
GND GND
RSATA_RXN3 RSATA_RXN4
RSATA_RXP3 RSATA_RXP4
GND GND
B
SATA6G_7 SATA6G_8
A
SATA6G_5 SATA6G_6
B
1-11