Transmitter Layout Throttle Right (Mode 1); Stick And Trim Control Summary - J. Perkins Twister Hawk Assembly & Flight Training Manual

TRANSMITTER LAYOUT THROTTLE RIGHT (MODE 1)

STICK AND TRIM CONTROL SUMMARY

1.Move the throttle (right stick) and throttle trim of your transmitter to the lowest (low throttle)
position as shown above.
2.Centre the trim levers of the 3 other transmitter functions.
3.Extend the transmitter aerial fully.
4.Switch on the transmitter.
http://www.modelengines.com.au
Available from:
Fore and aft cyclic trim
Fore and
aft/Yaw
stick
Yaw trim
www.modelflight.com.au
Twister Hawk
Throttle trim
Throttle/Roll
control
stick
Roll cyclic trim
9