Speedtouch™ Web - THOMSON SpeedTouch 585 User Manual

3.1 SpeedTouch™ Web Pages
Introduction
Starting an Internet
session
Monitoring your
Internet connection
E-DOC-CTC-20051017-0147 v2.0
As the SpeedTouch™ Web pages are controllable from any Operating System with
an installed Web browser, the method to establish PPP sessions described later, can
be used on any computer system.
For more information on Internet connection setup, refer to the provided
Installation and Setup Guide.
Proceed as follows to start an Internet session:
1
Open a Web browser on your computer and browse to the SpeedTouch™ Web
pages (see "1.2.1 Access via the Web Interface" on page 7
information).
The SpeedTouch™ home page appears by default.
2
Click Connect at the appropriate broadband connection.
You might be requested to enter your user name and password.
The SpeedTouch™ embedded PPP dial-in client establishes the Internet
connection.
3
Browse the Web.
You can view and monitor your connection to the Internet as long as the session is
running via:
The SpeedTouch™ System Information page: see
page 44.
The SpeedTouch™ Diagnostics task: see
page 52.
Internet Connectivity Dial-In Clients
for more
"4.3.1 Information" on
"4.4.1 Connectivity Check" on
Chapter 3
31