Premise LS Series Installation Instructions

WHAT'S IN THE BOX
• LED STRIP FIXTURE x 1
• BUTT END CONNECTOR x 1
• HARDWIRE CONNECTOR x 1
• DOUBLE-ENDED CONNECTOR x 1
• MOUNTING HARDWARE x 1

WHAT YOU MAY NEED

• SCREWDRIVER
• WIRE CUTTERS
• POWER CORD (LS-PC8) FOR DIRECT PLUG-IN
• HARDWIRE CORD (LS-HW8) FOR HARDWIRING
• DOUBLE-ENDED CORD (LS-CON2 or LS-CON4)
FOR 2 or 4 FOOT CONNECTIONS WITH
ANOTHER STRIP
• JUNCTION BOX (JS-JB)
• WIRING SUPPLIES AS SPECIFIED BY
ELECTRICAL CODE
LS Series
LED LINEAR STRIPS
INSTALLATION INSTRUCTIONS
For use with:
LS9-3 | LS9-4
LS24-3 | LS24-4
LS48-3 | LS48-4

IMPORTANT

Before assembling your fixture,
please make sure that you carefully
read through this instruction sheet.
Consider having your fixture installed
by a qualified licensed electrician.
Note: The important safeguards and
instructions that appear in this sheet
are not meant to cover all possible
conditions and situations that may
occur. It must be understood that
common sense, caution, and care
are factors that cannot be built into
any product. These factors must be
supplied by the person(s) caring for
and operating the fixture.

GENERAL INFORMATION

Before assembling your fixture,
please make sure that you carefully
read through this instruction sheet.
Consider having your fixture installed
by a qualified licensed electrician.
| LS12-3 | LS12-4
| LS36-3 | LS36-4
1