Braun VitalScan 1 Manual page 15

Error
«Hi»
«LO»
Readings from repeated
measurements differ
considerably.
* If this or any other problem occurs repeatedly, please consult your doctor.
Description
Pulse or cuff pressure
too high
Pulse too low
Blood pressure is a
fluctuating value.
For healthy adults, deviations
of 10 to 20 mmHg are
possible.
Cuff is not
properly fitted.
Readings were not
consistently taken at heart
level.
Talking, coughing, laughing,
moving etc. when measuring
will influence the reading.
Potential cause and remedy
The pressure in the cuff is too high (over
300 mmHg) OR the pulse is too high
(over 200 beats per minute). Relax for 5
minutes and repeat the measurement*.
The pulse is too low (less than 40 beats
per minute). Repeat the measurement*.
none
Ensure that the monitor is
fitted as follows:
- on the palm side of your wrist
- approx. 2 cm away from
palm line
For each measurement, hold the
monitor at heart level.
While measuring, relax, keep still, do not
move or speak.
13