Table of Contents
Advertisement
Available languages
Available languages
Cleaning Above Floors
1
3
For extended reach,
remove the High Reach
Extension Wand by
pressing the extension
wand release lever and
pulling the handle out
of the body.
5
Attach desired
tool by firmly
pushing onto end
of vacuum hose or
extension wand.
ATTENTION: The Brush Roll will continue to rotate while using your vacuum for above
floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the power
foot tilt forward.
Raise handle to
upright position.
TurboBrush® Tool
Use to clean stairs,
furniture, upholstery,
and more.
2
4
Connect the
hose to the
extension wand
by inserting into
the open end of
the extension
wand and
twisting to lock.
Crevice Tool
Use in tight and
narrow spaces.
Grasp hose and pull
up to remove from
hose holder.
Dusting Brush
Use to dust
upholstery, blinds,
shelves, and more.
www.BISSELL.com
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerForce Compact Turbo 2690 Series and is the answer not in the manual?
Questions and answers
Boswell power force compact turbo vacuum will not start
The Bissell PowerForce Compact Turbo 2690 Series vacuum may not start due to the following possible causes:
1. The power cord is not plugged in – Ensure the plug is securely connected to an electrical outlet.
2. A blown fuse or tripped circuit breaker – Check and replace the fuse or reset the circuit breaker if needed.
3. The dirt tank is full – Empty the dirt tank.
4. A dirty filter – Inspect the filter and clean or remove any dirt.
5. The hose is not securely connected – Ensure the hose is properly attached at both ends.
6. The dirt tank is not correctly positioned – Make sure the dirt tank is fully inserted and latched.
7. A vacuum path obstruction – Check for blockages in the air passage or intake area.
Following these steps should help resolve the issue.
This answer is automatically generated