Table of Contents
Advertisement
Available languages
Available languages
Limpieza del tanque de suciedad
ADVERTENCIA
Para reducir el riesgo de choque eléctrico, apague el interruptor de encendido y desconecte el enchufe del
tomacorriente antes de efectuar tareas de mantenimiento o hacer una comprobación para identificar fallas.
1
Retire el tanque de suciedad presionando el
botón de liberación del tanque de suciedad en
la parte superior de la manija del tanque.
3
Retire el separador primario levantándolo del
tanque de suciedad. El tanque y el separador se
pueden lavar con agua tibia a mano. Se puede
usar un detergente suave si desea. Enjuague
bien y deje secar completamente al aire.
2
Abra la tapa del tanque de suciedad
levantando el pestillo de liberación.
4
Retire la manguera haciendo girando para
desbloquear y tirando hacia arriba. Verifique
que la entrada no esté obstruida antes de
volver a armar.
www.BISSELL.com
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerForce Compact Turbo 2690 Series and is the answer not in the manual?
Questions and answers
Boswell power force compact turbo vacuum will not start
The Bissell PowerForce Compact Turbo 2690 Series vacuum may not start due to the following possible causes:
1. The power cord is not plugged in – Ensure the plug is securely connected to an electrical outlet.
2. A blown fuse or tripped circuit breaker – Check and replace the fuse or reset the circuit breaker if needed.
3. The dirt tank is full – Empty the dirt tank.
4. A dirty filter – Inspect the filter and clean or remove any dirt.
5. The hose is not securely connected – Ensure the hose is properly attached at both ends.
6. The dirt tank is not correctly positioned – Make sure the dirt tank is fully inserted and latched.
7. A vacuum path obstruction – Check for blockages in the air passage or intake area.
Following these steps should help resolve the issue.
This answer is automatically generated