Chapter 3: Menus; Menus On Your Dvd Player; (Basic Principles For Use); Player Menu - THOMSON DTH211 Owner's Manual

DTH211_EN_0210 11/02/03
Chapter 3
Menus on your DVD player (basic principles for use)
The functions of your DVD player are not all accessible directly through the remote control or
front panel keys. A certain number of functions are accessible through menus that you can display
or remove as you wish.These menus are used as follows.
The player menu appears when the player
is in STOP mode.
The Sound menu is an example of a
sub-menu.The arrows point to other
available functions
11:34 Page 17

Player menu

The player menu appears when no disc is being played.
When a disc is being played, press
The player menu then appears. Use navigation keys
, on the remote control unit to highlight the
desired function.Then press
selection and start the function or access the next menu.

Sub-menus

Sub-menus are indicated by an arrow on the right, telling
you that the line shown is not the name of a function but
that of another menu.To access it, highlight the name of
the sub-menu and press
The sub-menu appears to the right of the previous menu.
The Sound menu is an example of a sub-menu.When
the Sound line is highlighted, press
the sound menu appear in another menu).

Functions within menus

Lines without arrows are functions that can be accessed
directly by validating with the
can be used in two ways:
• The function starts working after validation with the
OK key.
The Resume Play function is an example. When Resume
play is highlighted, press
disappears).
• After validation with
choices, usually On and Off.
The Virtual Surround function is an example. When
Virtual Surround is highlighted press
setting from Off to On and vice-versa.
17
Menus
to stop play.
STOP
to validate your
OK
on the remote control unit.
OK
(the functions of
OK
key.These functions
OK
OK (replay begins and the menu
OK the function offers two
OK to change the
EN
EN
,