Repeat Playback Of A Scene Between Two Points A And B (Dvd - Vcd - Svcd); Sequence Marking (Dvds) - THOMSON DTH211 Owner's Manual

DTH211_EN_0210 11/02/03
Playing a disc
Sequence marking.
Reading or deleting
a marker.
Inserting a marker.
11:34 Page 14
Repeat playback of a scene between two points A and B
(DVD - VCD - SVCD)
A-B Repeat mode allows you to select exactly the sequence you wish to
repeat.
1.
Select the repeat playback function using the
A-B Repeat appears under the banner.
2.
Press to memorise the beginning of the scene you want to repeat
OK
(point A).
3.
Wait a few seconds before pressing
scene to be repeated (point B). A-B Repeat appears to tell you that the
repeat playback of the sequence is starting.To stop repeat, select another
mode using the or
Note: Repeat functions remain active until you turn them off, open the disc tray or
turn off the power. Repeat play only works with discs that show the elapsed time on
the display. This may not work correctly with certain discs (Video CDs in PBC mode).

Sequence marking (DVDs)

This function enables you to mark sequences on a disc so that you can access
them easily even if you switch you player off and on again (without having
ejected the disc).
You can mark up to 12 scenes per disc.
1.
While a disc is being played, press
banner.
2.
Press until the marking icon is highlighted.
3.
Press to display the marking banner.
OK
• To find a sequence, select the half disc and press
symbol is replaced by an arrow and a dustbin.The timer shows the
place marked.
• To play a scene with a marker, select the arrow and press
• To delete a marker, select the dustbin and press
Note: the marking banner displays the first 6 markers. To view the other 6 markers
use the or keys on the remote control unit.
or
OK again to mark the end of the
keys, or by pressing
PLAY MODE
to display the information
INFO
14
keys.
or .
STOP
. The half disc
OK
OK.
OK.