Fitting And Removal Of Base - Iiyama ProLite XB3288UHSU User Manual

FITTING AND REMOVAL OF BASE

CAUTION
 Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Install the Stand-Base as shown on the below picture.
Tighten the 'thumb screw' provided to secure the base to the monitor.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Loosen the 'thumb screw' to remove the Stand-Base from the monitor.
6 BEFORE YOU OPERATE THE MONITOR
Stand-Base
Hook
Stand-Base
Thumb screw for Stand-Base