Klarstein 10032486 Manual page 39

Replacing the activated charcoal filter:
1 Remove the metal grease filters
2 Remove the saturated activated charcoal filter.
3 Fit the new filters.
4 Replace the metal grease filters.
Fix:
1. Put in
2. Push forward
Remove:
1. Pull forward
2. Remove
Light Replacement
1 Remove the grease filter and carefully remove the 2 screws from the front plate (a
cross headed screwdriver will be needed to remove the screws).
2 Disconnect the terminal of LED light.
3 Press LED light on the back of the front plate, take the LED light out.
4 Replace the lamp(commercially available LED lamp (max.1.5W).
Remove:
1. Pull forward
2. Remove
Fix:
1. Put in
2. Push forward
EN
39