Table of Contents
Advertisement
IB5000_5200GB
4/09/01 10:11
B
efore you start
Basic connections
Connect all devices before plugging any power cords in the wall outlet. Always turn off the DVD
player, TV and other devices before you connect or disconnect any cables.
Audio connections
(See page 10).
Initial set-up
1.
Press
STANDBY/ON
remote control to switch on your DVD player.
• The first time you turn on the DVD, the language menu is
displayed. If it is not displayed, select the appropriate AV input of
your TV set manually (see the manual of your TV set).
2.
Press the appropriate
french, ...). If you do not press any number key, you will have to select manually all menus related
to the languages.
3.
You can now play discs. However we recommend (you complete the set-up first)
(p 12-13):
• The menus of the player and the menus, dialogues, and subtitles of DVDs will now be in the language
chosen in step 2. This choice applies to all DVDs.To change the language, see page 12. To temporarily
change the language of the dialogues and subtitles, see pages 17-18.
Fit the batteries
Do not mix different types of batteries (alkaline, rechargeable ...) or new and used ones.
4
The pages of this publication are printed on recycled paper. Other connections? See pages 10-11.
Page 4
AV1
on the DVD front panel or press
number key
on the remote control to select a language (1 for english, 2 for
United Kingdom,
Ireland
2
AV1
1
Peritel cable not supplied. Use an RGB
compatible Scart/Peritel cable (21
cabled pins)
Press 1 for English
B B
Pressez 2 pour Français
on the
Drücke 3 für Deutsch
Premere 4 per Italiano
Pulsar 5 para Español
Tryck 6 för Svenska
Continental Europe
On the DTH
5200 only.
Advertisement
Table of Contents
