Advertisement
Available languages
Available languages
Menu operation function list
Menu items
Signal
Source Select
Setting
Audio
Assign
Source Search
Aspect Setting
No Sync Action
No Operation
Action
OSD Menu
Language
H Position
V Position
Duration
Transparency
Status Display
Other
Volume
Reset
Information
Power Lamp
*1 This feature dose not work by setting the Color ADJUST to "DICOM SIM".
*2 If you select except Japanese in the Language setting of the First Time Installation menu,
Language is changed "English".
*3 This feature works , when you are viewing the "HDMI (Video) signal".
This feature does not work , when you are viewing the "HDMI (PC) signal".
*4 This feature dose not work by setting the DCR to "On".
Select the signal source.
PC-VGA
Select Off to set the monitor to mute sound.
DVI
Select Off to set the monitor to mute sound.
HDMI
Select audio input source.
Select the On to set the monitor is searching
automatically the input source.
Select the aspect ratio.
Select the On to set the monitor to turn
into Power saving mode , if no sync
condition continues for about 15 seconds.
Select the On to set the monitor to turn
into Stand-by mode if no operation
condition continues for about 4 hours.
Select the OSD language.
*2
Adjust the OSD horizontal position.
Adjust the OSD vertical position.
Adjust the OSD display time.
Adjust the OSD transparency.
Select for display of the signal input
connector name.
Adjust audio volume level.
Reset the menu settings.
*Reset operation is required for each input source.
Show the input connector name and
signal source name.
Select the power indicator setting.
* ON : In conjunction with the power indicator is lit.
* OFF : The power indicator is not enable.
Purpose
- 11 -
(cont.)
Settings
PC-VGA / DVI / HDMI
On / Off
On / Off
Digital / Analogue / Off
Off / On
Auto / Full / 4:3
On / Off
On / Off
English / Deutsch / Français
/ Español / 日本語
0 - 100
0 - 100
3 sec - 60 sec
0 - 7
On / Off
0 - 100
On / Off
*2
EN
Advertisement
