Advertisement
Available languages
Available languages
First time installation
When you turn on the power and the monitor, "First Time Installation" appears.
Start setting referring to the menu configuration.
For the setting items, see the pages below.
"Language" ☞ "Language" on page 11
"No Sync Action" ☞ "No Sync Action" on page 11
"No Operation Action" ☞ "No Operation Action" on page 11
*When you select the "Japanese" in the language setting, "No Operation Action" and "No Sync Action" First Time Installation setting
menu is not displayed. If you want to change the settings, see page 11, and set the menu operation.
Setting procedure
1 Press
/
to move the cursor to the setting item.
● Press to
2 Press
/
to select the setting values
● Each time you press one of
● Press to
3 Move the cursor to "Set"
4 Press to finish setting
● When you change the settings, a confirmation message appears.
Menu operation function list
Menu items
Main
Picture Mode
Contrast
*PC-VGA/
Brightness
DVI/
DCR
HDMI(PC)
Picture Mode
Main
Contrast
Brightness
*HDMI(Video)
Saturation
Tint
DCR
Sub
Auto Colour
Colour Temp.
User
Backlight
Aperture
Image
Auto Adjust
Adjustment
H Position
V Position
*PC-VGA only
Clock
Phase
Sharpness
EN
button, the setting value was confirmed.
/
buttons, the setting value changes.
button, the setting value was confirmed.
Select the picture modes.
*1
*4
Adjusts the contrast.
*1
*4
Adjusts the brightness.
*1
*4
Select the DCR(Dynamic Contrast Ratio).
*1
Select the picture modes.
*1
*4
Adjusts the contrast.
*1
*4
Adjusts the brightness.
*1
*4
Adjusts the saturation.
*1
*4
Adjusts the tint.
*1
*4
Select the DCR(Dynamic Contrast Ratio). Off / On
*1
Automatic adjustment of the white condition.
(*VGA only)
Select the whitebalance.
Red
Adjusts the red level.
Green
Adjusts the green level.
Blue
Adjusts the blue level.
Adjusts the backlight level.
*1
*4
Adjusts the aperture.
*3
Automatic adjustment of the picture position.
Adjusts the horizontal position of the screen. 0 - 100
Adjusts the vertical position of the screen.
Adjusts the clock.
Adjusts the phase.
Adjusts the sharpness.
Purpose
- 10 -
Settings
Standard / CCTV / User
0 - 100
0 - 100
Off / On
Standard / CCTV / User
0 - 100
0 - 100
0 - 100
0 - 100
Standard / Warm /
User / DICOM SIM. / Cool
0 - 255
0 - 255
0 - 255
0 - 100
0 - 2
0 - 100
0 - 100
0 - 100
0 - 4
Advertisement
