Radio; Manual Tuning; Storing Radio Stations - THOMSON DPL906VD_EN Owner's Manual

DPL906VD_EN 12/08/05
The player has a built-in tuner that allows for
FM radio function.

Manual tuning

1.
Connect the FM aerial in the correct manner.
2.
Press several times the
on the remote control or on the front
panel to select the Tuner mode.
3.
Tune a station by pressing repeatedly
BACKWARD
remote control until the desired station is
found.
Alternatively, you can use the
SCAN+ button to activate the automatic
search function. In this mode the player will
automatically tune frequencies until it finds
a station.
4. Repeat steps 3 to tune to another radio
station.
Note: If there is any interference, change the
aerial's position until the ideal sound reception is
obtained.TV and other electronic devices could be
the cause of interferences, so try to position the
aerial away from them.
9:54 Page 13
button
SOURCE
or FORWARD on the
or
SCAN-

Storing radio stations

The player can store up to 40 radio stations in
its memory.You can enter every single radio
station yourself or the player can store all
available radio stations automatically in
ascending order.
Automatic preset programming
1.
Press the SOURCE
Tuner mode.
2.
Press and hold PROGRAM
seconds to start automatic preset
programming.
Note: A weak signal can affect the "Automatic
preset programming" function's efficiency. Adjust
the aerial for better reception and a more
efficient search.
3. Radio frequencies will be browsed and
radio stations stored automatically.When
all the available radio stations are stored or
all 40 memory locations are full, the auto
preset programming function will stop.
Manual preset
1.
Tune to a radio station (see "Manual
tuning" for details).
2.
Press SLOW/MEMORY
control. P00 will appear on the display.
3.
Input your desired preset number (1-40)
using the numeric buttons, then press
SLOW/MEMORY
Retrieving preset stations
1.
Press the SOURCE
Tuner mode.
2.
Press PRESET -
the numeric buttons on the remote
control to select a preset station.
13

Radio

button to enter the
down for 3
on the remote
again to store it.
button to enter the
or PRESET+ or
EN