Intended Use; Technical Description - Dometic DoorLock DM100 Installation And Operating Manual

DoorLock DM100, DP100
6

Intended use

The DM 100 and DP100 door locks are designed for use as access control
for hotel interior doors.
7

Technical description

The DM 100 and DP100 consist of the following main parts (fig. 1, page 3):
 Mortice lock (11)
 Outer door handle (1)
 Inner door handle (8)
 Profile cylinder (6)
The batteries in the inner door handle provide the card reader in the outer
door handle with power. The card reader reads the means of identification
(SmartCard DM100: SmartCard, DP100: RFID-Transponder) and releases
the door for a period of 5 s. The door is kept open if the means of identifica-
tion is inserted into or held up to the card reader for at least 10 s.
After a successful sign-in on the door lock, the outer door handle is released
and the door can be opened.
The door lock is locked and unlocked from the inside using the knob in the
profile cylinder.
The door lock is locked and unlocked from the outside using the door key.
The door lock can be opened from the inside using the inner door handle,
whether it is locked or unlocked.
The door handles draw back the latch.
If there is no successful sign-in through the card reader, the outer door han-
dle does not function.
The inner door handle draws back both the latch and the bolt of the mortice
lock.
The profile cylinder pushes the bolt of the mortice lock into the locked or un-
locked position and draws back the latch.
EN
Intended use
30