Aux 1; Coaxial; Usb And Sd - auna Areal Bar 150 Instruction Manual

EN
16

AUX 1

AUX 1
Keep the unit powered on. Plug one end of the 3.5 mm AUX cord to the
headphone jack on your device. Plug the other end of the 3.5 mm AUX cord
into the AUX1 jack on the sound bar. It successfully joins into the AUX Mode
along with AUX1 icon lights up. Use the connected device's audio controls
for music playback.

COAXIAL

• If the source of your devices has digital connectors, using them will
improve the audio quality.
• Coaxial cable is supplied
• Connect the coaxial jack on the back of the unit to coaxial out jack of
your TV (or digital device etc.) by a supplied cable.
• Turn on the unit and switch to coaxial mode.

USB AND SD

Turn on the unit. Push USB disk with Mp3 music(s) into USB port, it will
switch to USB Playback Mode and then start to play music automatically.
Push the Micro SD card with Mp3 music(s) into the Micro SD card slot with
the metal contacts facing down. The card will stick out of the slot about
halfway. Waiting for a while, it will play music automatically.
Use the USB button on the remote control to switch between USB and SD if
both discs are connected. Otherwise, the respective connected data carrier
is automatically read out.