Table of Contents
Advertisement
Problem
Drying cycle too
6)
long
1) If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on. Select a new
programme. Touch the Start/Pause button. If the appliance does not operate contact the service centre
and provide the error code.
2) Follow the programme description — see the PROGRAMMES chapter .
3) See the
CARE AND CLEANING chapter.
4) Only dryers with the Séchage option.
5) See the HINTS AND TIPS chapter .
6) Note: After a maximum of 5 hours the drying cycle ends automatically.
11.1 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter
makes drying inefficient.
• The airflow slots are clogged.
• The humidity sensor is dirty.
• The drum is dirty.
12. TECHNICAL DATA
Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
Possible cause
1)
The filter is clogged.
The load is too large.
The laundry was not spun suffi-
ciently.
Too low or too high room temper-
ature - this is not the appliance
malfunction.
Clean the filter.
Do not exceed the maximum load
size.
Spin the laundry well in the wash-
ing machine.
Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach-
ieve best drying results is between
19°-24°C.
• Inadequate default dryness level
settings. See chapter
default dryness level
• Room temperature is too low or too
high. Optimal room temperature is
between 19°-24°C.
850 x 596 x 638 mm (maximal 663 mm)
1108 mm
958 mm
850 mm (+ 15 mm - feet regulation)
118 l
8,0 kg
230 V
50 Hz
66 dB
ENGLISH
23
Remedy
Adjustment of
Advertisement
Table of Contents
