Care And Cleaning - AEG T8DED844E User Manual

18 www.aeg.com
9.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Wait approximately 8 seconds.
3. Select 1 of the available
programmes.

10. CARE AND CLEANING

10.1 Cleaning the filter
At the end of each cycle the
symbol comes on the display and you
must clean the filter.
The filter collects the lint
during the drying cycle.
To achieve the best drying
performances clean the filter
regularly , clogged filter lead
to longer cycles and energy
consumption increase.
Use your hand to clean the
filter , and if necessary , a
vacuum cleaner .
CAUTION!
Avoid the use of water to
clean the filter. Instead
throw away lint in the
dustbin ( avoid dispersion of
plastic fiber in water
ambient).
4. Touch and hold down Anti-froissage
and Minuterie buttons at the same
time.
One of 2 configurations is possible:
• the réservoir indicator:
• the réservoir indicator:
1. Open the door. Pull the filter up.
filtre
2. Push the hook to open the filter.
3. Gather lint with hand from both
internal parts of the filter.
the symbol
water container indicator is
permanently activated
the symbol
water container indicator is
permanently deactivated
is on if
appears - the
is off if
appears - the