Advertisement
Available languages
Available languages
Dismantling
3. Pull the cable out of the loader.
Note
The piercing contacts of the IE M12 Plug PRO 4x2 can be released and re-used
up to 10 times. The ends of cables that have been pierced once must not be
pierced a second time. If you reassemble the cable, cut approximately 1 cm off.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks
in this publication may be trademarks whose use by third parties for their own purposes could
violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and
software described. Since variance cannot be precluded entirely, we cannot guarantee full
consistency. However, the information in this publication is reviewed regularly and any
necessary corrections are included in subsequent editions.
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
IE FC M12 Plug PRO 4x2
18
A5E03679115A,05/2015
IE FC M12 Plug PRO 4x2
A5E03679115A-AC, 05/2014
Advertisement
