Cleaning The Cooking Compartment Ceiling; Cleaning The Hook-In Racks - NEFF E35K22.0 Instruction Manual

Lift the door panel slightly and remove it in the direction of the
3.
hinges.
Removing the intermediate panel
Before removing, make a note of the position in which the
intermediate panel is fitted, so that you do not refit it the wrong
way round later.
Press the left and right-hand holders outwards.
1.
The intermediate panel disengages upwards.
Lift the intermediate panel slightly and take it out.
2.
Cleaning
Clean the door panels with glass cleaner and a soft cloth.
Caution!
Do not use any sharp or abrasive medium or a glass scraper.
The glass could be damaged.
Fitting the intermediate panel
Insert the intermediate panel on the left and right into the
1.
supports.
Push the intermediate panel downwards in the retainers.
2.
Fitting the door panel
Insert the door panel on the left and right into the supports.
1.
Press the door panel downwards into the plug-in holders.
2.
Refit the appliance door.
3.

Cleaning the cooking compartment ceiling

The grill element can be folded down to allow quick and easy
cleaning of the cooking compartment ceiling.
ã=
Risk of burning due to hot components in the cooking
compartment!
Wait until the cooking compartment has cooled down.
Pull the grill element retaining bracket towards the front and
1.
push it upwards until you hear the grill element disengage
(figure A).
Hold the grill element and fold it downwards (figure B).
2.
$
Clean the cooking compartment ceiling.
3.
Pull the retaining bracket towards the front and keep it
4.
pushed upwards.
Fold the grill element upwards, until it clicks into place.
5.

Cleaning the hook-in racks

You can remove the hook-in racks for easier cleaning.
ã=
Risk of burning due to hot components in the cooking
compartment!
Wait until the cooking compartment has cooled down.
Push the hook-in rack upwards at the front and unhook to the
1.
side (figure A).
Pull the hook-in rack forwards at the rear and unhook to the
2.
side (figure B).
$
Clean the hook-in rack with washing-up liquid and a sponge
3.
or brush.
Align the hook-in rack with the indentation (a) facing
4.
downwards, so that the shelf heights match.
Insert the hook-in rack at the rear as far as it will go and push
5.
to the rear (figure C).
Insert the hook-in rack at the front as far as it will go and push
6.
downwards (figure D).
&
D
%
%
'
D
17