Hyundai IONIQ Electric Quick Reference Manual page 15

FEATURES AND CONTROLS
DEFOGGING / DEFROSTING
1. Press the front
windshield
defrost control
button.
3. Set the fan
speed to the
highest
setting.
NOTE:
To reduce the tendency of the glass fogging and also to improve
visibility, keep the interior surface of the windshield clean by wiping it with
a clean cloth and glass cleaner. In addition, select air intake control to the
outside (fresh) air position whenever possible while operating the vehicle.
SYSTEM OFF
Pressing the OFF button will place the system in the
OFF mode.
• Blower will turn off.
• Outside (fresh) air position will be selected.
• Vented air will be at last set temperature.
MODE SELECTION
Changes the direction of the air flow as follow.
EV MODE
Push the EV button to enter the EV mode on the
AVN screen.
The EV mode has 6 or 7 menus such as Nearby
Stations, Energy Information, Drive Mode, ECO
driving, etc.
26 I Quick Reference Guide
AIR INTAKE CONTROL
2. Set the temperature
control to the
warmest setting.
HEAT BUTTON
DRIVER ONLY
AUTOMATIC HEATING / AIR CONDITIONING
Controls the modes, fan speeds, air intake and air-conditioning automatically.
REAR WINDOW DEFROSTER
HYUNDAI IONIQ ELECTRIC
Recirculated Outside (fresh) air
air position position
Push the HEAT button to turn the heater on.
Push the button again to turn the heater off.
If you press the DRIVER ONLY button, cold air mostly
blows in the direction of the driver's seat.
1. Press the AUTO 2. Set the temperature
button.
Press to activate/deactivate the rear window
defroster.
control to the desired
setting.
Quick Reference Guide I 27