Adjusting The Air Supply - Changing The Mouthpiece - InnoCigs CUBIS PRO CLEAROMIZER User Manual

INNOCIGS CUBIS PRO CLEAROMIZER – USING THE DEVICE
Adjusting the air supply
The airflow is located below the top cap of the device. It can be adjusted by simply turning and is easily
adaptable to your vapor preferences. The more slots are open, the lower is the drawing resistance. Pay
particular attention to a sufficient air supply during sub-ohm vaping.
Changing the mouthpiece
The mouthpiece is inserted into the top of the clearomizer. Accordingly, it can be removed by gently pulling
up and once again attached by applying gentle pressure on clearomizer. The mouthpiece may be cleaned
with warm water. Make sure the mouthpiece is completely dry before reinserting into the clearomizer.
27