Inserting A New Atomizer Coil - InnoCigs CUBIS PRO CLEAROMIZER User Manual

Table of Contents

Available languages

INNOCIGS CUBIS PRO CLEAROMIZER – USING THE DEVICE

Inserting a new atomizer coil

1. Remove the parts above the clearomizer tank from the device.

2. Remove the old atomizer coil.

3. Drip a few drops of liquid on the new atomizer coil.

4. Place the new atomizer coil into the top cap.

5. Screw the parts back to the clearomizer tank and make sure that the device is securely closed.

Please note the following:

Prior to first use, drip a few drops of your liquid on the atomizer coil and let it sit before vaping.

Please take several puffs without activating the atomizer and leave the atomizer sit for 15 minutes

in the e-liquid filled tank before use.

Don't clean atomizer heads with water.

Because atomizer coils are wearing parts, they must be changed regularly.

Table of Contents

Table of Contents

Do you have a question about the CUBIS PRO CLEAROMIZER and is the answer not in the manual?

Cubis pro