Technical Data; Disposal - AEG MC 4461 BT Instruction Manual

Deactivating the alarm function (in standby mode)
In order to deactivate the alarm function, press the V+/AL 1,
or V-/AL 2 button (4). The symbol " ", or " " will go out.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
CD jumps during Check the disc for
playback. fingerprints, dirt
or scratches.
The device can- The device is
not be operated. blocked, i.e.
"stuck".
No audio signal Device has not
during Bluetooth been registered
connection with the audio
source.
Volume too low
Bluetooth con- Registration
nection cannot doesn't work
be established
Audio source is
turned off
Bluetooth is
turned off on the
audio source.
Bluetooth version
is not supported.

Technical Data

Model: ........................................................................... MC 4461 BT
Power supply: ......................................................220-240 V~ 50 Hz
Power consumption:.................................................................11 W
Protection class: ................................................................................II
Net weight: .............................................................................2.21 kg
Radio section:
Bluetooth
Bluetooth support: ........................................................V2.1 + EDR
Range: ..................................................................approx. 15 meters
Transmission frequency: ......................................2.402-2.480 GHz
Solution
Protocols: ....................................................................A2DP, AVRCP
Ensure that the disc is
The right to make technical and design modifications in
inserted with the label
the course of continuous product development remains
facing upwards.
reserved.
Check the disc for
fingerprints, dirt or
This device has been tested according to all relevant current
scratches.
CE guidelines, such as electromagnetic compatibility and low
Remove the mains
voltage directives, and has been constructed in accordance
plug for approxi-
with the latest safety regulations.
mately 5 seconds.
Then turn the device
on again.
Check whether there
is a connection.
Reregister the device

Disposal

with the audio source,
if necessary.
Meaning of the "Dustbin" Symbol
Increase the volume
Protect our environment: do not dispose of electrical equip-
on the device.
ment in the domestic waste.
Increase the volume
on the audio source.
Please return any electrical equipment that you will no longer
Check, whether the
use to the collection points provided for their disposal.
audio source supports
This helps avoid the potential effects of incorrect disposal on
the A2DP protocol.
the environment and human health.
Turn the audio source
This will contribute to the recycling and other forms of reutili-
on
sation of electrical and electronic equipment.
Turn on the Bluetooth
function on the audio
Information concerning where the equipment can be dis-
source.
posed of can be obtained from your local authority.
Use a different play-
back device.
Frequency ranges:...............................FM 87.5 ~ 108.0 MHz
English
51