AEG MC 4461 BT Instruction Manual page 49

(8 on the remote control)
The music playback is stopped.
MODE/DISPLAY/CLK SET (9 on the device) or
MODE/CLK (6 on the remote control)
In case of a playing Audio CD:
Press once = ( emits a fixed light) the current
track is repeated continuously.
Press twice = ( ALL all emits a fixed light) the
whole CD is played continuously.
Press three times = (RAND emits a fixed light) all tracks are
played back in random order.
Press four times = all functions are cancelled. The normal
play mode is resumed.
Only with MP3 music playback:
Press once = the current track is repeated continu-
ously (
Press twice = the current folder of the MP3 CD or of
the USB storage medium is repeated
continuously (REP ALBUM appears in
the display). You can select the individual
folders with the buttons ALBUM+ and
ALBUM- (4 on the remote control). Press
the button (7) on the device to select
the folders.
Press three times = the whole CD is played continuously
( ALL appears in the display).
Press four times = (RAND emits a fixed light) All tracks are
played back in random order.
Press five times = the function is deactivated and the CD is
played in the normal mode.
ALBUM+ or ALBUM- (4 on the remote control)
Press these buttons during playback to select the next folder
up or down. If this button is pressed in stop mode the display
also appears briefly. Then start playback with the
ton (12/2). Press the button (7) on the device to select the
folders.
Programmed Play
This can be used to program any desired sequence of tracks.
(Only for CD/USB operation)
1. Press the button (8 on the remote control).
2. Press the PROG button (5 on the remote control). The
notification "P01" is shown on the display (memory slot).
Use the / buttons (4/13/3) to select the desired track
and then press the PROG button again. The display
changes to memory slot P02.
NOTE:
When the storage capacity of the titles to be pro-
grammed has been reached, the message "FUL" will
appear on the display.
appears in the display).
/ but-
3. Select the next track with the / buttons and press the
PROG button again. Repeat the procedure until all the
desired tracks are selected.
4. Press the / button (12/2). The playback starts. The
first selected title number is shown on the display, and
the indicator PROG or MP3 PROG lights up.
5. If you press the button (8 on the remote control), play-
back stops. The programming will remain in the memory.
The device stops automatically after all the programmed
tracks have been played back. The programmed sequence
will remain in the memory until you change to the other
mode or until the device is turned off.
Deleting programmed playback
Press the button (8 on the remote control) while in stop
mode. The display PROG will go out.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Programmed Play".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and
selfrecorded CDs.
Further more, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.
Connection of external devices
USB Connection (10)
This device has been developed in accordance with the
latest technical developments in the USB field. Unfortunately
the large number of different types of USB storage media on
offer today makes it impossible to guarantee full compatibil-
ity with all USB storage media. For this reason there may be
problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
1. Press the /FUNCTION / FUNC button (11/1) until USB
shows in the display.
2. Insert a USB storage medium directly into the corre
sponding connection.
English
49