G E T T I N G S TA R T E D
1.
Pull the handle of the filter cover to open the housing.
Remove the air filter from the housing. [Figure 1.1]
Figure 1.1
2. Take the filter out of its plastic packaging, then reinstall it into
the housing. Make sure the pull tabs on the filter are facing
out. [Figure 1.2]
NOTE: If you are not planning to use the air purifier for a long period of time, we recommend leaving the filter
inside its plastic packaging until it is ready to be used, to keep it clean.
8
pull tabs
facing out
Figure 1.2
3. Replace the filter cover by lining up the cover's feet with the
matching slots on the bottom of the housing. [Figure 1.3]
4. Push the cover securely closed. [Figure 1.4] The air purifier
uses a magnetic safety trigger to make sure that the filter
cover is closed. If not properly closed, the air purifier will not
turn on.
Figure 1.3
Figure 1.4