1 ABOUT LEAD FREE
SOLDER (PbF)
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
• • • • Pb free solder has a higher melting point than standard
solder; Typically the melting point is 50 - 70°F (30 -
40°C) higher. Please use a soldering iron with
temperature control and adjust it to 700 ± 20°F (370 ±
10°C). In case of using high temperature soldering iron,
please be careful not to heat too long.
• • • • Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
• • • • This lead free solder will be used for the products after
serial No. 1,000,001.
2 FEATURES
• • • • Sound System with Spurting Realism
(2-channel or 4-channel Power Amplifier)
• • • • Powerful Heavy Bass
(Stereo/Mono
Power
M9054EN
• • • • Radio Data System (RDS)
• • • • Not support 8 cm discs
• • • • Not compatible with MP3/WMA
3 FUSE
• • • • Use fuses of the same specified rating (15A).
• • • • Using different substitutes or fuses with higher rating, or
connecting the unit directly without a fuse, could cause fire
or damage to the unit.
4 MAINTENANCE
• • • • Wipe the unit with a soft dry cloth.
• • • • Never apply volatile liquids such as benzine and thinner to
prevent damage.
Amplifier)
:
CY-M7052EN/CY-
CQ-C1120AN / CQ-C1120GN / CQ-C1110AN / CQ-C1110GN / CQ-C1100VN
5 NOTES
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied already aligned at the
factory.
[CD DECK BLOCK]
This
model
has
no
microcomputer controls the servo circuit
6 DIMENSIONS
7 LASER PRODUCTS
3
servo
alignment
points
because